|
The black surface colored Draper Targa - Video Format Electric Projector Screen comes with black masking borders and is ideal for auditoriums and lecture halls, hospitals, hotels, churches, boardrooms and conference rooms. It has fire and mildew resistant viewing surface. The bottom of viewing surface is attached to weighted dowel. The three-position control switch can stop or reverse the screen at any point in the operating cycle. The switches are furnished complete with cover plate.
The Electric Projector Screen has electrically operated motor mounted inside 3 inch diameter metal roller and is instantly reversible, lifetime lubricated, with internal thermal over load protector and electric brake. The motor has built-in low voltage controller and preset electronic limits. The case is made of 22 gauge, one piece steel with flat back design and scratch-resistant white polyester finish. The end caps are finished to match case, forming universal, wall or suspended hanging brackets. It is available in different image area sizes and screen materials.
|
|
|
|
|
|
|
|
|
|
|
|
-
Gain: 1.00 in
-
Screen Fabric: Matte white, Glass beaded, High contrast gray, AT1200, AT gray
-
Format: Video
-
Aspect Ratio: 4:03
-
Diagonal Viewing Size: 72, 84, 100, 120, 132, 150, 180, 200 in
-
Application: Auditorium, Lecture halls, Hospitals, Hotels, Churches, Boardrooms and conference rooms
-
Switch: 3 Position control switch
-
Mounting: Wall or ceiling
-
Border: Yes
-
Construction: Composition wood case
-
Motor: (3) Wire motor
-
Screen Height: 56.50, 66.50, 80, 92, 104, 116, 140, 158 in
-
Screen Width: 42.5, 50, 60, 69, 78, 87, 105, 118 in
-
Voltage: 110 - 120 V
-
Casing Color: White
Product Overview & Specs
The black surface colored Draper Targa - Video Format Electric Projector Screen comes with black masking borders and is ideal for auditoriums and lecture halls, hospitals, hotels, churches, boardrooms and conference rooms. It has fire and mildew resistant viewing surface. The bottom of viewing surface is attached to weighted dowel. The three-position control switch can stop or reverse the screen at any point in the operating cycle. The switches are furnished complete with cover plate.
The Electric Projector Screen has electrically operated motor mounted inside 3 inch diameter metal roller and is instantly reversible, lifetime lubricated, with internal thermal over load protector and electric brake. The motor has built-in low voltage controller and preset electronic limits. The case is made of 22 gauge, one piece steel with flat back design and scratch-resistant white polyester finish. The end caps are finished to match case, forming universal, wall or suspended hanging brackets. It is available in different image area sizes and screen materials.
- 4:3 Screen aspect ratio
- Matte white fiberglass fabric with a 1.0 gain
- Mounts on wall or hangs from ceiling
- Easy wiring, detachable wall-switch and power cord
- User defined vertical position pre-setting
- 4 Side black masking border
- Includes IR remote control
|
|
|
