|
In this Da-Lite Veneer Model B Square Format manual projector screen, this fabric is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that fabric may be easily replaced yet cannot be pulled from roller. This Manual Projector Screen has a heavy 22 gauge octagonal steel case with flat back design with baked enamel finish and fitted with end caps concealing roller ends with integral bearing surface to support roller. Veneer wrapped case fits in any room decor. The wall or ceiling mounted Manual Projector Screen uses matte white or glass beaded screen fabric. Integral brackets for wall mounting by means of slotted screw holes and ceiling mounting by means of powder coated hanger rings. Bottom of fabric is mounted into a metal strip in a tubular steel slat finished in baked enamel. Ends of slats are protected by plastic caps, plated steel slat pull is attached with screws. Easy pull-down system locks at intervals to fit a variety of projection formats. This Manual Projector Screen is available in different heights and frame colors.
|
|
|
|
|
|
|
|
|
|
|
|
-
Screen Height: 60, 70, 64, 84, 72, 96 in
-
Screen Width: 60, 70, 64, 84, 72, 96 in
-
Screen Fabric: Matte White, Glass Beaded
-
Format: Square
-
Viewing Angle: 50 Deg
-
Application: Room Decor
-
Mounting: Wall, Ceiling Mount
-
Roller Type: Spring Roller
-
Bearings: Nylon
-
Contrast: High Contrast
-
Package Length: 63.37, 73.37, 87.37, 99.37 in
-
Package Weight: 31, 33, 40, 42, 44, 46 lbs
Product Overview & Specs
In this Da-Lite Veneer Model B Square Format manual projector screen, this fabric is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that fabric may be easily replaced yet cannot be pulled from roller. This Manual Projector Screen has a heavy 22 gauge octagonal steel case with flat back design with baked enamel finish and fitted with end caps concealing roller ends with integral bearing surface to support roller. Veneer wrapped case fits in any room decor. The wall or ceiling mounted Manual Projector Screen uses matte white or glass beaded screen fabric. Integral brackets for wall mounting by means of slotted screw holes and ceiling mounting by means of powder coated hanger rings. Bottom of fabric is mounted into a metal strip in a tubular steel slat finished in baked enamel. Ends of slats are protected by plastic caps, plated steel slat pull is attached with screws. Easy pull-down system locks at intervals to fit a variety of projection formats. This Manual Projector Screen is available in different heights and frame colors.
- Square screen format
- Provides dependable service and beauty
- Nylon bearings provide smooth quiet operation for the life of the screen
- 22 Gauge octagonal steel case with flat back design
- Fabric is mounted into a metal strip in a metal camlok roller system
- Easy pull-down system locks at intervals to fit a variety of projection formats
- Veneer wrapped case fits any room decor
- Choose from different height and frame colors
|
|
|
