|
The Da-Lite Square Format Designer Contour Electrol Screen has an electrically operated motor, mounted inside the roller with a patented noise silencer. It is three-wire quick reversal type, oiled for life, with automatic thermal overload cut-out, integral gears, and capacitor. The preset, but adjustable limit switches automatically stop the picture surface in the "up" and "down" positions. The roller is made of rigid metal, and is 2 inches in diameter. The roller mounting brackets are adjustable and allow centering or offsetting of the screen within the case. The screen case is a two piece design made of extruded aluminum. The screen fabric is flame retardant and mildew resistant fiberglass. The bottom of the fabric is formed into a pocket holding a 3/8 inch metal rod. The screen includes a three-position control switch and a cover plate. It is listed by Underwriters' Laboratories.
This Electric Projector Screen is available in a variety of sizes and fabrics. The veneer case front cover comes in different finishes. Choose from two operating voltages and three case colors. The single motor low voltage control system is optional.
|
|
|
|
|
|
|
|
|
|
|
|
-
Screen Fabric: Matte white, Glass beaded, Video spectra 1.5, High contrast matte white, High power
-
Format: Square
-
Diagonal Viewing Size: 71, 85, 99, 199, 120, 136 in
-
Switch: IR/RF remote, Wall switch
-
Mounting: Wall or ceiling
-
Border: Yes
-
Contrast: High contrast
-
Screen Height: 50, 60, 70, 84, 96 in
-
Screen Width: 50, 60, 70, 84, 96 in
-
Voltage: 120/220 V
-
Casing Color: Casing Color: Graphite, Black, White
Veneer Case Cover Finish: Light oak, Medium oak, Natural walnut, Heritage walnut, Mahogany, Cherry, Honey maple
Product Overview & Specs
The Da-Lite Square Format Designer Contour Electrol Screen has an electrically operated motor, mounted inside the roller with a patented noise silencer. It is three-wire quick reversal type, oiled for life, with automatic thermal overload cut-out, integral gears, and capacitor. The preset, but adjustable limit switches automatically stop the picture surface in the "up" and "down" positions. The roller is made of rigid metal, and is 2 inches in diameter. The roller mounting brackets are adjustable and allow centering or offsetting of the screen within the case. The screen case is a two piece design made of extruded aluminum. The screen fabric is flame retardant and mildew resistant fiberglass. The bottom of the fabric is formed into a pocket holding a 3/8 inch metal rod. The screen includes a three-position control switch and a cover plate. It is listed by Underwriters' Laboratories.
This Electric Projector Screen is available in a variety of sizes and fabrics. The veneer case front cover comes in different finishes. Choose from two operating voltages and three case colors. The single motor low voltage control system is optional.
- Stylish curved aluminum extruded case
- Electrically operated motor, mounted inside the roller with a patented noise silencer
- Preset, but adjustable limit switches automatically stop the picture surface in the desired positions
- 2" Dia roller made of rigid metal
- Adjustable roller mounting brackets allow centering or offsetting of the screen within the case
- Screen fabric is flame retardant and mildew resistant fiberglass
- Bottom of the fabric formed into a pocket holding a 3/8" metal rod
- Includes a 3-position control switch and cover plate
- Listed by Underwriters' laboratories
- Available in a variety of sizes and fabrics
- Veneer case front cover in different finishes
- Choose from 2 operating voltages and 3 case colors
- Single motor low voltage control system is optional
|
|
|
