|
The Da-Lite Model C with CSR Video Format manual projector screen can be mounted on a ball bearing rigid steel spring roller and provides great performance and smooth operation. The fabric is permanently attached to roller by metal clips on fabric edge being forced into groove in roller. There is a clip in every 3 inch along the fabric edge and double clips are used on the ends. The powder coated steel end caps concealing roller ends with steel inner plates to support roller and provide added case strength. End caps form sturdy brackets for wall or ceiling installations. Bottom of screen is formed into pocket holding tubular metal slat. An extruded aluminum saddle with zinc plated steel pull is attached to the slat by four screws on each end. Heavy-duty plastic caps are protecting the ends of the slat. Bumper stops are built into the case to prevent slat wedging inside case. This Manual Projector Screen is available in various diagonal viewing sizes and fabrics.
CSR is a feature offered exclusively by Da-Lite to control the return speed of the screen surface back into the case, which is 22-gauge embossed steel case with flat back design finished with enamel. It will allow operator to release screen from the full down position. The screen will fast travel to within approximately 2 inch of the case. The screen will then slow down and coast into the case without damage to the fabric.
|
|
|
|
|
|
|
|
|
|
|
|
-
Screen Height: 50, 60, 69, 87,105, 120 in
-
Screen Width: 67, 80, 92, 116, 140, 160 in
-
Screen Fabric: Matte White, Glass Beaded, Video Spectra, Silver Matte, High Contrast, High Power
-
Format: Video
-
Viewing Angle: 45 Deg
-
Diagonal Viewing Size: 84, 100, 120, 150, 180, 200 in
-
Application: Conference, Training Room, Classroom
-
Mounting: Wall, Ceiling Mount
-
Roller Type: Spring Roller
-
Bearings: Nylon
-
Border: Black masking border
-
Contrast: High Contrast
-
Construction: Handsome, rugged and enamel steel case
-
Package Length: 73.12, 87.31, 99.31, 123.31, 147.31, 167.31 in
-
Package Weight: 42, 49, 53, 66, 73, 82 lbs
Product Overview & Specs
The Da-Lite Model C with CSR Video Format manual projector screen can be mounted on a ball bearing rigid steel spring roller and provides great performance and smooth operation. The fabric is permanently attached to roller by metal clips on fabric edge being forced into groove in roller. There is a clip in every 3 inch along the fabric edge and double clips are used on the ends. The powder coated steel end caps concealing roller ends with steel inner plates to support roller and provide added case strength. End caps form sturdy brackets for wall or ceiling installations. Bottom of screen is formed into pocket holding tubular metal slat. An extruded aluminum saddle with zinc plated steel pull is attached to the slat by four screws on each end. Heavy-duty plastic caps are protecting the ends of the slat. Bumper stops are built into the case to prevent slat wedging inside case. This Manual Projector Screen is available in various diagonal viewing sizes and fabrics.
CSR is a feature offered exclusively by Da-Lite to control the return speed of the screen surface back into the case, which is 22-gauge embossed steel case with flat back design finished with enamel. It will allow operator to release screen from the full down position. The screen will fast travel to within approximately 2 inch of the case. The screen will then slow down and coast into the case without damage to the fabric.
- Manual spring operated projection screen
- Provides great performance and smooth operation
- Controlled Screen Return (CSR)
- Wall or ceiling mount typed Manual Projector Screen
- Mounted on a ball bearing rigid steel spring roller
- 22-gauge Embossed steel case with flat back design finished with enamel
- Fabric permanently attached to roller by metal clips
- Powder coated steel end caps
- Double clips used on the fabric ends
- Bottom of screen is formed into pocket holding tubular metal slat
- Extruded aluminum saddle with zinc plated steel pull
- Heavy-duty plastic caps to protect the ends of slat
- Bumper stops shall be built into the case
- Offered in a wide range of diagonal viewing sizes with different fabrics
|
|
|
