|
This Da-Lite Model B with CSR Square Format manual projector screen adds an impressive feature to the ever-popular design. The CSR system ensures the quiet controlled return of the screen into the case providing optimal performance and smooth, consistent operation. The screen has a painted white 22-gauge octagonal steel case with flat back design in baked enamel finish. The case is fitted with end caps concealing roller ends with integral bearing surface to support roller and integral brackets for wall mounting by means of slotted screw holes, and ceiling mounting by means of powder coated hanger rings. The bottom of fabric is mounted into a metal strip in a tubular steel slat finished in baked enamel. Ends of slat are protected by plastic caps. Plated steel slat pull is attached to slat with screws. A 36 inches pull cord with plastic knob is included. Fabric is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that fabric may be easily replaced yet cannot be pulled from roller. The Manual Projector Screen is available in different diagonal viewing sizes and fabrics.
|
|
|
|
|
|
|
|
|
|
|
|
-
Screen Height: 60, 70, 84, 96 in
-
Screen Width: 60, 70, 84, 96 in
-
Screen Fabric: Matte White, Glass Beaded, Video Spectra, High Power, High Contrast Matte White
-
Format: Square
-
Application: Classroom, Meeting Room
-
Mounting: Flush, Dual wall, Ceiling Mount
-
Roller Type: Easy pull-down system locks
-
Bearings: Nylon
-
Border: No
-
Contrast: High Contrast
-
Package Weight: 60 inch: 16 lbs
70 inch: 19 lbs
84 inch: 26, 28 lbs
96 inch: 30, 32 lbs
Product Overview & Specs
This Da-Lite Model B with CSR Square Format manual projector screen adds an impressive feature to the ever-popular design. The CSR system ensures the quiet controlled return of the screen into the case providing optimal performance and smooth, consistent operation. The screen has a painted white 22-gauge octagonal steel case with flat back design in baked enamel finish. The case is fitted with end caps concealing roller ends with integral bearing surface to support roller and integral brackets for wall mounting by means of slotted screw holes, and ceiling mounting by means of powder coated hanger rings. The bottom of fabric is mounted into a metal strip in a tubular steel slat finished in baked enamel. Ends of slat are protected by plastic caps. Plated steel slat pull is attached to slat with screws. A 36 inches pull cord with plastic knob is included. Fabric is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that fabric may be easily replaced yet cannot be pulled from roller. The Manual Projector Screen is available in different diagonal viewing sizes and fabrics.
- Ensures quiet controlled return of the screen into the case providing optimal performance and smooth, consistent operation
- Screen painted white 22-gauge octagonal steel case with flat back design with baked enamel finish
- Ends of slat protected by plastic caps
- Case fitted with end caps concealing roller ends with integral bearing surface to support roller and integral brackets for wall mounting by means of slotted screw holes
- Ceiling mounting by means of powder coated hanger rings
- Plated steel slat pull attached to slat with screws
- 36&334; Pull cord with plastic knob
- Masking borders standard on flame retardant and mildew resistant seamless fabric
- Available in different diagonal viewing sizes with several fabrics
|
|
|
