|
The Da-Lite Designer Model B Matte White Square Format manual projector screen has a 22 gauge octagon embossed steel case with flat back design and baked enamel finish and fitted with end caps concealing roller ends with integral bearing surface to support roller. The Manual Projector Screen is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that the fabric may be easily replaced yet cannot be pulled from roller. End caps to have integral brackets for wall mounting by means of slotted screw holes and ceiling mounting by means of powder coated hanger rings. Ends of slat are protected by plastic outer caps. The most versatile screen surface and the premier choice when ambient light is controllable. It evenly distributes light over a wide viewing area while colors remain bright and life-like, with no shifts in hue. It can be cleaned with mild soap and water. Flame retardant and mildew resistant. A metal saddle, with plated steel pull is attached to the slat. A permanently attached, self-concealing tension device has one end secured to the rear of the screen case and the other end extending through the slat pull, terminating in a contour-shaped, molded plastic rocker handle to lock and release the device. A 20 inch pull cord with plastic knob is attached to the saddle. The wall or ceiling mounted Manual Projector Screen is available in different heights and frame colors.
|
|
|
|
|
|
|
|
|
|
|
|
-
Screen Height: 50, 60, 70, 64, 84, 72, 96 in
-
Screen Width: 50, 60, 70, 64, 84, 72, 96 in
-
Screen Fabric: Matte White
-
Format: Square
-
Viewing Angle: 50 Deg
-
Mounting: Wall, Ceiling Mount
-
Bearings: Nylon
-
Contrast: High Contrast
-
Construction: 22 gauge heavy octagonal steel
-
Hanger Distance: 42.62, 52.62, 62.62, 72.62, 86.62, 98.62 in
-
Bracket: 3.37, 3.62 in
-
Package Length: 53.37, 63.37, 73.37, 87.37, 99.37 in
-
Package Weight: 28, 31, 33, 40, 42, 46 lbs
Product Overview & Specs
The Da-Lite Designer Model B Matte White Square Format manual projector screen has a 22 gauge octagon embossed steel case with flat back design and baked enamel finish and fitted with end caps concealing roller ends with integral bearing surface to support roller. The Manual Projector Screen is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that the fabric may be easily replaced yet cannot be pulled from roller. End caps to have integral brackets for wall mounting by means of slotted screw holes and ceiling mounting by means of powder coated hanger rings. Ends of slat are protected by plastic outer caps. The most versatile screen surface and the premier choice when ambient light is controllable. It evenly distributes light over a wide viewing area while colors remain bright and life-like, with no shifts in hue. It can be cleaned with mild soap and water. Flame retardant and mildew resistant. A metal saddle, with plated steel pull is attached to the slat. A permanently attached, self-concealing tension device has one end secured to the rear of the screen case and the other end extending through the slat pull, terminating in a contour-shaped, molded plastic rocker handle to lock and release the device. A 20 inch pull cord with plastic knob is attached to the saddle. The wall or ceiling mounted Manual Projector Screen is available in different heights and frame colors.
- Matte white screen fabric
- Square screen format
- Suitable for offices, training and meeting rooms
- 22 gauge Octagon steel case with flat back design
- Most versatile screen surface
- Premier choice when ambient light is controllable
- Flame retardant and mildew resistant
- Built-in tensioning arm locks in place when screen is extended to provide a flat, tensioned surface
- Permanently attached, self-concealing tension device
- 20&334; Pull cord with plastic knob
- Available in different heights and frame colors
|
|
|
