|
The wall or ceiling mounted Da-Lite Designer Model B Glass Beaded Square Format manual projector screen has a 22 gauge octagon embossed steel case with flat back design and baked enamel finish and fitted with end caps concealing roller ends with integral bearing surface to support roller. The Manual Projector Screen is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that the fabric may be easily replaced yet cannot be pulled from roller. End caps to have integral brackets for wall mounting by means of slotted screw holes and ceiling mounting by means of powder coated hanger rings. Bottom of fabric is mounted into a metal strip in a tubular steel slat finished in baked enamel. This glass beaded surface has the ability to achieve a higher gain by reflecting more of the projected image back along the projection axis. It is impregnated into the surface to provide additional reflectance. This attribute creates an unparalleled screen surface that reproduces vibrant life-like color at moderate viewing angles. A metal saddle, with plated steel pull is attached to the slat. A 20 inch pull cord with plastic knob is attached to the saddle. The Manual Projector Screen with square screen format is available in different heights and frame colors.
|
|
|
|
|
|
|
|
|
|
|
|
-
Screen Height: 50, 60, 70, 64, 84, 72, 96 in
-
Screen Width: 50, 60, 70, 64, 84, 72, 96 in
-
Screen Fabric: Glass Beaded
-
Format: Square
-
Viewing Angle: 30 Deg
-
Application: Room Decor
-
Mounting: Wall, Ceiling Mount
-
Roller Type: Spring Roller
-
Bearings: Nylon
-
Border: 4 Sides black masking border
-
Contrast: High Contrast
-
Hanger Distance: 42.62, 52.62, 62.62, 72.62, 86.62, 98.62 in
-
Bracket: 3.37, 3.62 in
-
Package Length: 53.37, 63.37, 73.37, 87.37, 99.37 in
-
Package Weight: 28, 31, 33, 40, 42, 46 lbs
Product Overview & Specs
The wall or ceiling mounted Da-Lite Designer Model B Glass Beaded Square Format manual projector screen has a 22 gauge octagon embossed steel case with flat back design and baked enamel finish and fitted with end caps concealing roller ends with integral bearing surface to support roller. The Manual Projector Screen is mounted into a metal strip in a metal camlok roller system without tape, glue, staples or cords so that the fabric may be easily replaced yet cannot be pulled from roller. End caps to have integral brackets for wall mounting by means of slotted screw holes and ceiling mounting by means of powder coated hanger rings. Bottom of fabric is mounted into a metal strip in a tubular steel slat finished in baked enamel. This glass beaded surface has the ability to achieve a higher gain by reflecting more of the projected image back along the projection axis. It is impregnated into the surface to provide additional reflectance. This attribute creates an unparalleled screen surface that reproduces vibrant life-like color at moderate viewing angles. A metal saddle, with plated steel pull is attached to the slat. A 20 inch pull cord with plastic knob is attached to the saddle. The Manual Projector Screen with square screen format is available in different heights and frame colors.
- Suitable for offices, training and meeting rooms
- Glass beaded screen fabric
- Square screen format
- 22 Gauge octagon embossed steel case with flat back design
- Permanently attached, self-concealing tension device
- Built-in tensioning arm locks in place when screen is extended to provide a flat, tensioned viewing surface
- Glass beaded surface has the ability to achieve a higher gain
- Provide additional reflectance
- Flame retardant and mildew resistant
- 20&334; Pull cord with plastic knob
- Choose from different heights and frame colors
|
|
|
