Da-Lite Da-Mat Tensioned Horizon Electrol Screen NTSC Format

The Da-Lite Da-Mat Tensioned Horizon Electrol Screen NTSC Format is excellent for video projection applications. This is the first screen available allowing four-position masking with the touch of a button. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking remains flush against the surface of the screen, preventing distracting shadows around the image. The patented in-the-roller motor mounting system allows for quiet operation. Screen is equipped with a six-button wall switch, you can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom slat bar with added weight maintains vertical tension. The unique step-back masking design eliminates shadows.

The Da-Mat screen surface is a smooth, white, vinyl finish for precise image reproduction. It provides an exceptionally wide angle of view with little loss of resolution. It is a highly flexible unsupported vinyl fabric and may be folded or rolled. Screen surface is flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. It has reset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions. The fabric roller is made of rigid aluminum 3-3/16 inch in diameter. The mask roller is made of rigid aluminum 3-3/16 inch in diameter. The screen surface with black masking borders standard. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. It has the masking fabric to convert the screen to different video formats. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. The Electric Projector Screen is available in different sizes. Choose from 120 Volts or 220 Volts operating voltage.

Product Overview & Specs

The Da-Lite Da-Mat Tensioned Horizon Electrol Screen NTSC Format is excellent for video projection applications. This is the first screen available allowing four-position masking with the touch of a button. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking remains flush against the surface of the screen, preventing distracting shadows around the image. The patented in-the-roller motor mounting system allows for quiet operation. Screen is equipped with a six-button wall switch, you can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom slat bar with added weight maintains vertical tension. The unique step-back masking design eliminates shadows.

The Da-Mat screen surface is a smooth, white, vinyl finish for precise image reproduction. It provides an exceptionally wide angle of view with little loss of resolution. It is a highly flexible unsupported vinyl fabric and may be folded or rolled. Screen surface is flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. It has reset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions. The fabric roller is made of rigid aluminum 3-3/16 inch in diameter. The mask roller is made of rigid aluminum 3-3/16 inch in diameter. The screen surface with black masking borders standard. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. It has the masking fabric to convert the screen to different video formats. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. The Electric Projector Screen is available in different sizes. Choose from 120 Volts or 220 Volts operating voltage.

• First screen allows 4-position masking with the touch of button
• Dry contact provided on the electronic controller
• Careful engineering ensures the masking remains flush against the surface of the screen
• Patented in-the-roller motor mounting system for quiet operation
• Equipped with 6 button wall switch
• Halt operation and position the screen into any of the four aspect ratios
• Screen tensioned for extra flat surface for optimum image quality when using video or data projection
• 2 Specially designed motors mounted inside two rollers
• Quick reversal type, oiled for life, with automatic thermal overload cutout
• Integral gears, capacitor, embedded microprocessor control and electric brake to prevent coasting
• Rigid aluminum fabric rooler with 3-3/16" in diameter
• Flame-retardant and mildew resistant vinyl
• Surface with black masking borders standard
• Custom slat bar with added weight maintains vertical tension on the screen surface
• 60 Deg. viewing angle screen surface
• Ends of the aluminum slat protected by heavy-duty plastic plugs
• Case is wood and finished with black primer coat
• Available in 2 different sizes
• Choose from 120 V or 220 V operating voltages

A lower price may be available

When exactly will it arrive? Will I be able to assemble it? Do you have any coupons? Do you have any refurbished units? Help! I'm confused.