Da-Lite Da-Mat High Contrast Tensioned Horizon Electrol Screen NTSC Format

This Da-Lite Da-Mat High Contrast Tensioned Horizon Electrol Screen NTSC Format is the first allowing four-position masking with the touch of a button and is excellent for video projection applications. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking remains flush against the surface of the screen, preventing distracting shadows around the image. The patented in-the-roller motor mounting system allows for quiet operation. Equipped with a six-button wall switch, you can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom slat bar with added weight maintains vertical tension.

The high contrast Da-Mat is a smooth, gray, vinyl finish surface for high output LCD and DLP projectors. This surface improves the perceived contrast by lowering black levels. It is a flexible unsupported vinyl fabric and may be folded or rolled. Available on all models offered with the Da-Mat surface. Screen surface is a flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. It has reset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions. The fabric roller is made of rigid aluminum 3-3/16 inch in diameter. The mask roller is made of rigid aluminum 3-3/16 inch in diameter. The screen surface with black masking borders standard. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. It has the masking fabric to convert the screen to different video formats. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. Case is made of wood and finished with a black primer coat. The Electric Projector Screen is offered in different sizes and operating voltages.

Product Overview & Specs

This Da-Lite Da-Mat High Contrast Tensioned Horizon Electrol Screen NTSC Format is the first allowing four-position masking with the touch of a button and is excellent for video projection applications. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking remains flush against the surface of the screen, preventing distracting shadows around the image. The patented in-the-roller motor mounting system allows for quiet operation. Equipped with a six-button wall switch, you can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom slat bar with added weight maintains vertical tension.

The high contrast Da-Mat is a smooth, gray, vinyl finish surface for high output LCD and DLP projectors. This surface improves the perceived contrast by lowering black levels. It is a flexible unsupported vinyl fabric and may be folded or rolled. Available on all models offered with the Da-Mat surface. Screen surface is a flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. It has reset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions. The fabric roller is made of rigid aluminum 3-3/16 inch in diameter. The mask roller is made of rigid aluminum 3-3/16 inch in diameter. The screen surface with black masking borders standard. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. It has the masking fabric to convert the screen to different video formats. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. Case is made of wood and finished with a black primer coat. The Electric Projector Screen is offered in different sizes and operating voltages.

• First screen allows 4-position masking with the touch of button
• Dry contact is provided on the electronic controller
• Careful engineering ensures the masking remains flush against the surface of the screen
• Excellent for video projection applications
• Preventing distracting shadows around the image
• Patented in-the-roller motor mounting system allows for quiet operation
• Equipped with six-button wall switch
• Automatically open and close the screen
• Halt operation and position the screen into any of the four aspect ratios
• Screen is tensioned for extra flat surface for optimum image quality when using video or data projection
• Unique "step-back" masking design eliminates shadows
• 2 Specially designed motors mounted inside two rollers
• Quick reversal type, oiled for life, with automatic thermal overload cutout
• Integral gears, capacitor, embedded microprocessor control and electric brake to prevent coasting
• Fabric roller is of rigid aluminum 3-3/16" in diameter
• Mask roller is of rigid aluminum 3-3/16" in diameter
• Screen fabric is seamless
• Flame-retardant and mildew resistant vinyl
• Surface with black masking borders standard
• Custom slat bar with added weight maintains vertical tension on the screen surface
• 45 Deg. viewing angle screen surface
• Ends of the aluminum slat to be protected by heavy-duty plastic plugs
• Bottom of the masking fabric is formed into pocket holding flat aluminum bar
• Case is wood and finished with black primer coat
• Offered in different sizes and 2 operating voltages

A lower price may be available

When exactly will it arrive? Will I be able to assemble it? Do you have any coupons? Do you have any refurbished units? Help! I'm confused.