Da-Lite Cinema Vision Tensioned Horizon Electrol Screen NTSC Format

The Da-Lite Cinema Vision Tensioned Horizon Electrol Screen NTSC Format is the first allowing four-position masking with the touch of a button and is excellent for video projection applications. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking and remains flush against the surface of the screen, preventing distracting shadows around the image. The screen is patented in-the-roller motor mounting system that allows for quiet operation. Equipped with a six-button wall switch, you can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom slat bar with added weight maintains vertical tension. The unique step-back masking design eliminates shadows.

The cinema vision is a unique unsupported vinyl surface that offers a bright, uniform image with no color shift no matter at what angle you view the image. Screen surface is flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers. It also features quick reversal type, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. It has reset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions. The fabric and the mask roller is made of rigid aluminum 3-3/16 inch in diameter. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. The Electric Projector Screen is available in different sizes and is offered in 220 Volts or 120 Volts operating voltages.

Product Overview & Specs

The Da-Lite Cinema Vision Tensioned Horizon Electrol Screen NTSC Format is the first allowing four-position masking with the touch of a button and is excellent for video projection applications. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking and remains flush against the surface of the screen, preventing distracting shadows around the image. The screen is patented in-the-roller motor mounting system that allows for quiet operation. Equipped with a six-button wall switch, you can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom slat bar with added weight maintains vertical tension. The unique step-back masking design eliminates shadows.

The cinema vision is a unique unsupported vinyl surface that offers a bright, uniform image with no color shift no matter at what angle you view the image. Screen surface is flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers. It also features quick reversal type, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. It has reset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions. The fabric and the mask roller is made of rigid aluminum 3-3/16 inch in diameter. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. The Electric Projector Screen is available in different sizes and is offered in 220 Volts or 120 Volts operating voltages.

• Prevent distracting shadows around the image
• Patented in-the-roller motor mounting system allows for quiet operation
• Careful engineering ensures the masking remains flush against the surface of the screen
• Dry contact provided on the electronic controller
• Excellent for video projection applications
• Equipped with 6 button wall switch
• Halt operation and position the screen into any of the four aspect ratios
• Screen is tensioned for extra flat surface for optimum image quality when using video or data projection
• Unique "step-back" masking design eliminates shadows
• 2 Specially designed motors mounted inside 2 rollers
• Quick reversal type, oiled for life, with automatic thermal overload cutout
• Integral gears, capacitor, embedded microprocessor control and electric brake to prevent coasting
• Fabric and mask roller of rigid aluminum
• Seamless screen fabric
• Flame-retardant and mildew resistant vinyl
• Surface with black masking borders standard
• Custom slat bar with added weight to maintain vertical tension on the screen surface
• Ends of the aluminum slat to be protected by heavy-duty plastic plugs
• Bottom of the masking fabric formed into pocket holding flat aluminum bar
• Offered in different sizes
• Select from 220 V or 120 V operating voltages

A lower price may be available

When exactly will it arrive? Will I be able to assemble it? Do you have any coupons? Do you have any refurbished units? Help! I'm confused.