Da-Lite Cinema Vision High Contrast Tensioned Horizon Electrol Screen NTSC Format

The Da-Lite Cinema Vision High Contrast Tensioned Horizon Electrol Screen NTSC Format that is excellent for video projection applications, is patented in the roller motor mounting system and allows for quiet operation. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking remains flush against the surface of the screen, preventing distracting shadows around the image. Equipped with a six-button wall switch, can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom, slat bar with added weight maintains vertical tension. The unique "step-back" masking design eliminates shadows.

The High contrast cinema vision is a smooth, gray, vinyl finish surface for moderate output DLP projectors. This surface improves the perceived contrast by lowering black levels while offering moderate gain. It is a flexible unsupported vinyl fabric and may be folded or rolled. Available on all models offered with the Cinema Vision surface. Screen surface is flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers, to be quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. To have preset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions, the fabric and the mask roller is to be of rigid aluminum 3-3/16 inch in diameter. The screen surface with black masking borders standard. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. It has the masking fabric to convert the screen to different video formats and custom slat bar, with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. This screen is available Electric Projector Screen is available in different sizes. Choose from 120 Volts or 220 Volts operating voltages.

Product Overview & Specs

The Da-Lite Cinema Vision High Contrast Tensioned Horizon Electrol Screen NTSC Format that is excellent for video projection applications, is patented in the roller motor mounting system and allows for quiet operation. Dry contacts are provided on the electronic controller so you can adjust the screen to the factory presets from a properly equipped projector or master control. The careful engineering ensures the masking remains flush against the surface of the screen, preventing distracting shadows around the image. Equipped with a six-button wall switch, can automatically open and close, halt operation and position the screen into any of the four aspect ratios. Screen is tensioned for an extra flat surface for optimum image quality when using video or data projection. Tab guide cable system maintains even lateral tension to hold surface flat while custom, slat bar with added weight maintains vertical tension. The unique "step-back" masking design eliminates shadows.

The High contrast cinema vision is a smooth, gray, vinyl finish surface for moderate output DLP projectors. This surface improves the perceived contrast by lowering black levels while offering moderate gain. It is a flexible unsupported vinyl fabric and may be folded or rolled. Available on all models offered with the Cinema Vision surface. Screen surface is flame retardant and mildew resistant, and can be cleaned with mild soap and water. This Electric Projector Screen has two specially designed motors mounted inside two rollers, to be quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, embedded microprocessor control and an electric brake to prevent coasting. To have preset but adjustable limit switches to automatically stop the picture surfaces in the up, down and three intermediate positions, the fabric and the mask roller is to be of rigid aluminum 3-3/16 inch in diameter. The screen surface with black masking borders standard. Each side of the fabric to has tab guide cable system to maintain even lateral tension and hold surface flat. It has the masking fabric to convert the screen to different video formats and custom slat bar, with added weight maintains vertical tension on the screen surface. The ends of the aluminum slat are protected by heavy-duty plastic plugs. Bottom of the masking fabric is formed into a pocket holding a flat aluminum bar. This screen is available Electric Projector Screen is available in different sizes. Choose from 120 Volts or 220 Volts operating voltages.

• Prevent distracting shadows around the image
• Patented in-the-roller motor mounting system for quiet operation
• Careful engineering ensures the masking remains flush against the surface of the screen
• First screen allows 4-position masking with the touch of button
• Dry contact provided on the electronic controller
• Excellent for video projection applications
• Equipped with 6 button wall switch
• Halt operation and position the screen into any of the 4 aspect ratios
• Screen tensioned for extra flat surface
• Unique "step-back" masking design eliminates shadows
• 2 Specially designed motors mounted inside 2 rollers
• Quick reversal type, oiled for life, with automatic thermal overload cutout
• Integral gears, capacitor, embedded microprocessor control and electric brake to prevent coasting
• Rigid aluminum fabric and mask roller
• Seamless screen fabric
• Flame-retardant and mildew resistant vinyl
• Surface with black masking borders standard
• Custom slat bar with added weight to maintain vertical tension on the screen surface
• 50 Deg. viewing angle screen surface
• Ends of the aluminum slat to be protected by heavy-duty plastic plugs
• Bottom of the masking fabric formed into pocket holding flat aluminum bar
• Offered in different sizes and 2 operating voltages

A lower price may be available

When exactly will it arrive? Will I be able to assemble it? Do you have any coupons? Do you have any refurbished units? Help! I'm confused.